Multi-Utility Gateway for Smart Metering Applications
Modular architecture separating the gateway from meter and HAN
Wired meter interface (RS485 or RS232)
- DLMS and 1107 protocol (EN62056-21)
- MODBUS RTU
Wireless M-Bus interface– Open Metering Communication
- EN 13757-3/4 (W-MBus)
IrDA Interface, wired M-Bus via optional module
Two Ethernet interfaces
Support for Internet- and security standards
- TCP/IP, SSH, HTTP(S)/XML
- HTTP(S) authentication, X.509
- NTP, DHCP, PPPoE
- DynDNS, STUN
- AES encryption
Push operation (ftp, http(s))
Browser based configuration and administration
Operating status signaled by LEDs
Remote firmware update
The gMUC-GPRS controller from Sagemcom Dr. Neuhaus GmbH enables multi-line remote data reading from domestic and industrial supply meters and other sensors by means of GSM/GPRS network or DSL connections. Measurement values for electricity, gas, water and heat are automatically transmitted to one or more centrals locations using common Internet standards.
Meters are connected by wire (RS485 or RS232 and wired M-Bus via optional module) or via short-range radio (wireless M-Bus). Other technologies and interfaces, such as ZigBee or RF169, are available upon request. The device can be configured and administered remotely. A local interface enables direct access to measurement values for end customers (e.g. PC, display solutions, mobile devices).
The gMUC-GPRS controller meets all requirements of large-scale deployments. When mounting the gateways locally in households, only cables need to be connected.
The gMUC-GPRS controller is a state-of-the-art communication module based on proven hardware, and it complies with European Smart Metering standardization activities.
CONTACT TO SALES
Sagemcom Dr. Neuhaus GmbH
D-22453 Hamburg - Germany
Phone: +49 (40) 55304 203
Fax: +49 (40) 55304 180