• Natural gas Smart Meter with remote communication and management system


Measuring technology: synthetic diaphragm with rotating valve.
Electronic temperature compensation according to OIML R137.
Full bore shut-off valve with remote operation functionality.
Self-lubricated polymer moving parts.
High accuracy and long term stability.
Two row, sixteen column LCD display with index.
User push button for meter reading.
Valve opening push button.
ZVEI optical interface according to IEC Standard 61107.
Integral anti-tampering system.
Lithium battery for metrological card supply, average lifetime 15 years under reference conditions.
Compatible with standard 110 mm meters.
Zinc plated carbon steel case powder coated flameproof according to EN 1359.
Max operating pressure 0,5 bar g.
Operating temperature -25/+55°C.
ATEX Approved for installation under Zone II category 3.
Approval according to European Directive CE 2004/22/EC MID MI-002, OIML R137, EN 1359 (as
Colours: meter case grey RAL 9002, electronic enclosure grey RAL 7040
MID Certified by NMI International.



Built-in battery operated GSM/GPRS radio-communication card, average battery lifetime 8 years
under reference conditions, communication protocol DLMS-COSEM.
Built-in battery operated Wireless M-Bus 169 Mhz radio-communication card, average battery
lifetime 15 years under reference conditions, communication protocol DLMS-COSEM.
Other type of threaded connection available on request.


The residential meter EG4EVO sets a new standard in natural gas metering, it represents a perfect match between traditional diaphragm mechanical meter and advanced electronic high performance metering.The primary measuring elements consist of two measuring chambers that are separated by synthetic diaphragms; the chambers are filled and emptied periodically by the differential pressure between inlet and outlet. The movement of the diaphragms is transferred to the rotating valve that is controlling the gas flow. The valve rotation is then converted into an electrical signal using a custom encoder.

A full-bore ball valve, installed inside the meter case on the inlet side, allows remote disconnection for operation purposes; the valve is fitted with status switches and it is designed in order to minimize pressure drop. The valve re-opening require remote enabling and user intervention on dedicated push button.